Note: Touch Screen, Pencil, DS1820, LCD, Serial Cable and GLCD are not included in the price!
EasyPIC6 is a development system that supports over 160 8-, 14-, 18-, 20-, 28- and 40-pin PIC MCUs.
Very fast, on-board USB 2.0 programmer with a simplified driver installation.
mikroICD is a hardware tool designed for testing and debugging programs on PIC microcontrollers.
EasyPIC6 allows PIC microcontrollers to be interfaced with a wide range of peripheral modules.
On-board 16-bit I/O port expanderMCP23S17 that uses SPI communication.
EasyPIC6 includes an on-boardTouch Screen controller with a Touch Panel connector.
RS-232 communicationwith a PC or a microcontroller is performed via DB9 connector.
System can be configured by means of DIP switches. Each DIP switch configures one part of the system.
Digital thermometerDS1820 measures temperature from -55°C to 125°C. It is connected to the system via socket.
System provides support for MCUs in DIP8, DIP14, DIP18, DIP20, DIP28 andDIP40 packages. It comes with a PIC16F887.
2 potentiometers are used for testing multiple A/D conversions. Inputs can be configured via jumpers.
USB or external power supply source is selected by moving a jumper.Power supply switchturns the system on/off.
2x16 character COG Display is used for displaying text messages. It is connected to the system via SPI.
All microcontroller pins are connected to the IDC10 connectors for further expansion.
36 LEDs (Light Emitting Diodes) are used to indicate the logic states of all microcontroller pins.
On-board jumpers are used for pull-up/pull-down port configuration. These jumpers are available for all pins.
36 push buttons are used to excite microcontroller digital inputs. They are connected to all microcontroller pins.
DIP switch is used to separate port pins from pull-up/pull-down resistors.
Very fast USB 2.0 programmer withmikroICD support. There is no need for connecting the external programmer.
LCD can be easily connected via the on-board connector that is also connected to MCU pins.
LCD Contrast Potentiometer is used for adjusting LCD contrast.
Touch Screen can be connected to the board viaTouch screen connector. There is also a Touch Screen controller.
External power supplycan be either DC or AC. The on-board jumper is used for selecting external power supply.
Quartz Crystal is replaceable. The MCU pins can be configured via jumpers as oscillator inputs or regular I/O pins.
Graphic LCD 128x64 can be easily connected to the board via the appropriate connector. It is connected to MCU pins.
MCU pins are marked on the back of the board. These marks provide basic information on the pins.
Voltage level to be applied when a button is pressed (GND or +5V) is selected via the on-board jumper.
USB communication connector enables you to connect your microcontroller with a PC via USB interface.
Reset circuit is used to reset the microcontroller. It is connected to the MCLR pin of the microcontroller.
PS2 connector enables the development system to be directly connected to a PS/2 device such as keyboard or mouse.
4x4 Keypad allows efficient entry of numeric data and other characters as well.
Menu Keypad enables easy and fast menu browsing for your prototype device.
Port Expander enables you to add more inputs or outputs to your prototype device.
On-Board Programmer and In-Circuit Debugger
3 in 1 Development System - Development System + On-Board USB 2.0 programmer + On-Board mikroICD (In-Circuit Debugger): mikroICD is a highly effective tool for Real-Time debugging at hardware level. It enables you to execute mikroC, mikroPascal and mikroBasic programs on a host PIC microcontroller and monitor variable values, Special Function Registers (SFRs), RAM and EEPROM memory modules while the program is running. There is an ultra fast USB 2.0 programmer for MCU programming that now supports more PIC microcontrollers.
Windows® Certified Drivers
Drivers for the on-board programmer are Microsoft® Windows® XP, Windows® Vista and Windows® 7 certified. The Windows certificate is a proof that the programmer supports mentioned Windows operating systems and is immediately recognized by the system, which guarantees correct Plug and Play functionality. Driver certification provides users with a wide range of benefits such as stable functioning, the ability to install and delete drivers without rebooting and compatibility with future versions of Windows.
The EasyPIC6 development system supports a wide range of microcontrollers including over 160 PIC microcontrollers. Newly released PIC microcontrollers will be supported by a new version of PICFlash software that is updated regularly. Here is a list of all microcontrollers supported by the EasyPIC6 development system:
|PIC10 AND PIC12 MICROCONTROLLERS FAMILY|
|PIC16 MICROCONTROLLERS FAMILY|